Chongqing HLA Mechanical Equipment Co., Ltd.
Responsibility is quality assurance,quality is the life of the brand.
Add to Cart
Auto Turbine Oil Filtration Machine / Oil Water Separator For Marine Steam Turbine
Application:
Series TVP vacuum oil purifier is special designed for turbine oil, lubricating oil and cooling oil to removing a large amount of moisture and impurity. Such as power plants, power station steam turbine in the process of running, moisture, dust and impurities will be mixed in the turbine oil, will accelerate the oxidation of oil, and changed with foam, fouling and oil sludge, cause the oil emulsified serious, and lead to oil-water separation more difficult, reduce the oil performance of lubrication, speed, cooling etc. Meanwhile caused the metal parts of turbine steam to corrosion, bad for the safe operation of steam turbine. So TVP series machine is the special maintenance equipment for the power plant, power station to clean the used turbine oil.
Features:
1) Turbine oil and water separator completely breaking the emulsion by adopt vacuum technology, molecular absorption, vacuum drying, automatically break emulsification technology.
2) Used unique ternary once dehydration method, not only remove large amounts of water from oil, but also remove trace moisture from oil, with high efficiency of dehydration and breaking the emulsion, it can let the serious turbid emulsion oil become transparent cleaning.
3) Filter can be washed and repeatedly use, it have long life and need low cost. High-precision filter configuration can effectively remove fine particulate impurities from the oil.
4) Turbine oil and water separator have adopt low-load design in heater, ensured it can heat oil uniformly, can effectively prevent cracking and aging hazards of oil.
5) Advanced electrical systems and automatic infrared oil control system.
6) Turbine oil and water separator can unattended running with the turbine or other equipment, low noise, it correspond the high standard of world environmental protection requirements.
7) TVP turbine oil filter with the automatic drainage device can drain continuously, it is easy operation and hommization.
8) If oil acid value is too high, you can choice BZ regeneration device to mach TVP, reduce the acid value and dielectric loss, after process, acid value ≤0.03(mgKOH/g), let quality indicator meet the standard of "GB / T 7596-2008" the operation of turbine oil quality standards ". it can demulsification, dehydration, remove acid and impurities online, let the turbid emulsified turbine oil become clear and transparent.
Technical specification:
| Model | TVP300 | |
| Capacity(L/min) | 300 | |
| Working vacuum | -0.06～-0.095 Mpa | |
| Working pressure | ≤ 0.4 Mpa | |
| Temperature range | 0-100℃ | |
| Water content | ≤10 ppm | |
| Gas content | ≤ 0.1% | |
| Demulsifying value | ≤15min(GB/F7035) | |
| Cleanness | NAS 6 grade | |
| Filtering precision | ≤3 micron | |
| Continuous work | 100 hr | |
| No failure running | ≥5000 hr | |
| Power supply | 380V, 50HZ, 3PH ( or Customized ) | |
| Working noise | 65 dB | |
| Heating power (kw) | 160 | |
| Total power (kw) | 178 | |
| Inlet/outlet(mm) | 65 | |
| Weight (kg) | 1350 | |
|
Dimension (mm) |
L | 2000 |
| W | 1350 | |
| H | 2100 | |
Advantages:
It completely breaking the emulsion by adopt vacuum technology, molecular absorption, vacuum drying, automatically break emulsification technology. Used unique ternary once dehydration method, not only remove large amounts of water from oil, but also remove trace moisture from oil, with high efficiency of dehydration and breaking the emulsion, it can let the serious turbid emulsion oil become transparent cleaning. can be washed and repeatedly use, it have long life and need low cost. High-precision filter configuration can effectively remove fine particulate impurities from the oil. It using a combination of strong wind and water-cooled technology media condensing unit, condensing and except water from high temperature and high fever mixed gas.
Relative Information:
1.Maintenance
1). check and adjust after oil purifier works for a period of time
A. all the electric control apparatus
B. temperature controller
C. oil seals and motor couplings
D. clean filter elements, check pumps and motors
E. all the pipes for leaking
2). Clean the motor and change the lubricating grease
3). Check and add specified lubricating oil to vacuum pump,
4). If oil purifier is not in use for one month or more, put it on a dry, flat ground, close all valves and electric cabinet, cove the whole machine with canvas
2.Customer Service
Installation
Commissioning
Complete Turnkey Applications
Spare parts
Service And Maintenance Schemes
Technical Support Network
Available Parts for customer option:
1. Fully closed-type for protecting oil purifier machine (weather proof, vacuum proof, Waterproof, dust proof etc.)
2. Mobile trailer with enclosed type can move long distance working in field.
3. Choosing different vacuum pump, oil pump and electric parts(such as SCHNEIDER, SIEMENS, LEYBOLD,ABB etc.)
4. PLC controller for operation fully-automatically and explosion proof materials
On-line Moisture detector, flow meter, viscosity tester, acidity tester etc.