Chongqing HLA Mechanical Equipment Co., Ltd.
Responsibility is quality assurance,quality is the life of the brand.
Add to Cart
Mineral Oil Lube Oil Centrifugal Filtration Equipment Disc Type 3000 L/hour
Application:
The HCF centrifugal filtration is mainly used for remove the free water and impurities from the oil,it can be applied to heavy diesel oil, lubricating oil, transformer oil, hydraulic oil, turbine oil clarification and purification to slow wear of diesel engine or other types of machines, and extend the service life of the machine and oil,also can be applied for some of vegetable oil,plant oil which can’t dissolve in water and the density is lower than water, such as peanut oil,palm oil,sunflower oil,turpentine oil etc.
Features:
1. Using high-speed disc centrifuge, separation more thoroughly.
2. Have self-discharging function,automatic trash, continuous and efficient.
3. Using screw oil pump, lower noise, more stable performance.
4. PLC programmable controller, enabling unattended,the operation is simple, safe and reliable.
5. Have integrated protection system (filter blocking alarm, motor overload alarm, power fault phase, protection, over voltage and low voltage protection etc.)
Description of HCF:
Disc type centrifuge separator can be used in two ways:
Liquid-Solid separation ( Suspension of low concentration), it is called clarification operation.
liquid-liquid (or liquid-liquid-solid)separation (Suspension of emulsion).
Disc centrifuge separator is compact design, small size, big production. It is widely applied in chemical, pharmaceutical, light industry, food, biological engineering, and transportation sectors etc.
Disc centrifuge separator is vertical type. Drum is mounted on the top of vertical shaft . High-speed revolution through the transmission device driven by a motor. There is a folding disk plate together inside the drum. There is a small gap between the disc. Suspension (or emulsion) is injected the drum through a feed pipe in the center of the drum.The solid particles or liquid droplets forms sediment layer (or hydraulic) under the action of centrifugal force when the suspension (or emulsion) through the clearance between the discs. Sediment is sliding along the surface of plate , gathering in the largest diameter of inside the drum. Then the liquid is released from drum. The function of disc is to shorten the setting distance of solid particulate or liquid, increasing the setting area.
With disc in drum, which largely improve the production capacity. The solid sediment will be removed manually or automatically.
Parameters:
| Index | Unit | HCF-3000A(auto type) |
| Flow Rate | L/H | 3000 |
| Separating factor | a/g | 8800 |
| Running speed | r/min | 8300 |
| Particles | μ | 1 |
| Water content | ppm | 50 |
| Maximum viscosity | cSt | ≤320 |
| Power Supply | 380V, 50HZ, 3PH ( or Customized ) | |
| Motor Power | kW | 8 |
| Heater Power | kW | 30 |
| Total Power | kW | 38 |
| Sludge-discharge | Automatic | |
| Outlet Pressure | MPa | ≤0.2 |
| Weight | Kgs | 950 |
| Dimension | mm | 1200*850*1100 |
Packaging & Delivery:
1. Prompt deliver at the very day.
2. Well-trained and disciplined packing team.
3. After-sale service:Any questions or problems after receiving the product, please feel free to contact us. Problems would be solved for you immediately.
4. Sophisticated and professional logistic agent.